Showing 1–16 of 189 results

  • AEMC 193-24

     Features: – Nominal Range: 3000AAC – Measurement Range: 10A to 6500AAC – Probe Output Signal: 140mVAC/3000AAC at 50/60Hz – NOTE: Output is proportional to the amplitude and frequency of the measured current. – Sensor: Length = 24″ (610mm); Ø = 7.64″ (190mm) – Length = 36″ (910mm); Ø = 11.46″ (290mm) – Safety: EN 61010-1 and 2, Read more

  • AEMC 3945

     Features: 1) Single-phase & three-phase power  measurement 2) Real time color display 3) Phase diagram display 4) kVAh, Varh & kWh 5) Tranient capture 6) Harmonic distortion 7) Power recording 8) Includes dataview software. Accessories available for RENT with this product: <A HREF=http://www.accutechrentals.com/cat2.php?index=273&p_id=47> <FONT color=blue>AEMC 193-24, 3000A Flex CT’s </FONT> </A> <A HREF=http://www.accutechrentals.com/cat2.php?index=272&p_id=47> <FONT color=blue>AEMC Read more

  • AEMC 6250

     Features Measures from 0.001mΩ (1µΩ resolution) to 2500.0Ω Test current selection of 1mA, 10mA, 100mA, 1A and 10A RTD temperature probe to check tested sample (optional) Selectable metal types Automatic and manual temperature correction EMF levels measured and eliminated in measurement Two programmable alarm set points Stores up to 1500 test results Selectable Inductive and Read more

  • AEMC 6471

     Features: * Test ground resistance using the 2 clamp method (no auxiliary rods needed) * 2- and 4-Pole Bond Resistance/Continuity measurement (DC Resistance) with automatic polarity reversal * 3-Pole Fall-of-Potential measurement with manual or automatic frequency selection * 4-Pole Soil Resistivity measurement with automatic calculation of Rho (r) and user selection of the Wenner or Read more

  • AEMC 8335

     Features: 1) Single-phase & three-phase power  measurement 2) Real time color display 3) Phase diagram display 4) kVAh, Varh & kWh 5) Tranient capture 6) Harmonic distortion 7) Power recording 8) Includes dataview software. Accessories available for RENT with this product: <A HREF=http://www.accutechrentals.com/cat2.php?index=273&p_id=47> <FONT color=blue>AEMC 193-24, 3000A Flex CT’s </FONT> </A> <A HREF=http://www.accutechrentals.com/cat2.php?index=272&p_id=47> <FONT color=blue>AEMC Read more

  • AEMC K110

     Features: – Measures extremely low level DC from 100?A – Outputs signal proportional to total current (DC + AC) – Low noise – Ultra-compact size and non-contact clamp-on convenience – Simple plug-in operation – Designed for use with DMMs and oscilloscopes – Accurate display of waveforms – No range or mode (AC/DC) switching required – Read more

  • AEMC MA193

     Accutech rents this AEMC MA193, Current Transformer, 1000 Amps and other equipment.

  • AEMC MN103

     Accutech rents this AEMC MN103, Current Transformer 100/10 Amps and other equipment.

  • AEMC MN193

     Features: -The MN193 is designed to work with secondary current transformers. Best accuracy is available when entering the transformer ratio (e.g. 1000/5A) -Nominal Range: 5A and 100AAC -Measurement Range: 5A: 0.005A to 5AAC; 100A: 0.1A to 100AAC -Probe Output Signal: 5A: 200mV/AAC; 100A: 10mV/AAC -Maximum Clamping Diameter: 0.8? (20mm) -Safety: NF EN 61010-2-032, 600V, CAT Read more

  • Altek 1118-100psid

     Features: – Fast, Accurate Results – Selectable Engineering Units – Pressure Switch Testing Built-In – Full Scale Accuracy of 0.05%+ 1 Digit – Five Digit Resolution – 100 Hour Battery Life with Automatic Shut-off – Easy to Carry, Easy to Use

  • Ametek RTC157A

     Features: – High accuracy Down to ?0.04?C using the external reference sensor. 4-wire True-Ohm-Measurement technology is used. – Excellent stability 0.005˚C – Wide temperature range. From -45 to 155?C (@ 23 deg. ambient temperature) – Improved temperature homogeneity Unique active dual-zone block ensures good temperature homogeneity in the calibration zone.

  • Astro-Med DASH 8n

     The Astro-Med is an 8 channel memory recorder with a universal inputs and has a playback mode as well as a viewing mode.

  • BAUR DPA 75 C Oil Tester

     The BAUR DPA 75 C oil tester developed especially for mobile use in the field is one of its kind in the market due to its functionality and excellent user benefits in comparison to the costs. The BAUR DPA 75 C delivers clear and reliable measurement results. Compact and robust device for portable use onsite Read more

  • Baur IRG 200

     Pulse reflection instrument for location of faults of cables and overhead lines. The pulse reflection fault locating instrument IRG 200 is for thw location of faults in single and multi-core, high and low-voltage cables, telecommunication cables of every  type and over head lines.

  • Baur PGK25

     Features: – integrated timer 1-30 min (± 1 min) with automatic final disconnection and release of discharge device – stepless adjustable output voltage 0 – 5 kV and 0 – 25 kV DC – voltage measurement is made directly at high voltage output – zero interlock of high voltage – high voltage plug with control contact – current measurement: decade switching Read more

  • Baur PGK80

     Features: 1) One-piece construcion, including high-voltage section 2) Built-in automatic discharge device 3) Timer with acoustic signal and selectable automatic shut-down 4) Six measuring ranges decade selctable 5) Smallest readable current 20 nA 6) Interlock for external safety devices 7) Stabilized output 8) Variable voltage limit setting