Showing 1–16 of 22 results

  • Ametek RTC157A

    Features: – High accuracy Down to ?0.04?C using the external reference sensor. 4-wire True-Ohm-Measurement technology is used. – Excellent stability 0.005˚C – Wide temperature range. From -45 to 155?C (@ 23 deg. ambient temperature) – Improved temperature homogeneity Unique active dual-zone block ensures good temperature homogeneity in the calibration zone.
  • Crystal NVision

    Features: – Pressure accuracy to 0.025% of reading – Field-replaceable modules: pressure, temperature,current and voltage – Temperature compensation from -20ºC to 50ºC – ATEX/IECEx intrinsically safe – Log and display 500,000 points at up to 10 readings/sec on up to two modules simultaneously – IP67 (1 meter immersion for 30 minutes) – Uses Crystal’s new Read more
  • Crystal nVision Temperature Module (RTD100)

    Features: Works with 2-, 3-, and 4-wire Pt100 RTDs Accuracy +/-(0.015% of reading) Units – oC, oF , K, R, Ω Includes an IP67 rated, M8 connector terminal block
  • Delta Instruments SADP-GY-IS

    Features: – Certified Intrinsically Safe for use in explosive atmospheres: II 1G EEx ia IIC T4 (Ta -20ºC to +50ºC) – User Selectable Units – ºC, ºF, ppm(v), ppb(v), ppm(w), g/m3, lbs/MMSCF – Desiccant Dry Down Assembly for Quick Measurements – Electronic Automatic Calibration – Pressure Correction Computation – Various Ranges between -110ºC to + 20ºC dewpoint – True Hand Held Portable Read more
  • Flir E60

    Features: – Thermal resolutions from 160 x 120 up to 320 x 240  Integrated visible light camera with LED lamp on every model – Temperature Range 650ºC – Fast image sharing from FLIR E40/50/60 with Wi-Fi mobile apps – Dual charger and spare battery option for all-day operation
  • Fluke / Hart Scientific 1521

    The 1521 Handheld Thermometer is suppied with a Hart Scientific 5627A-12-I RTD.
  • Fluke 80PK-3A

    Designed for measuring the temperature of flat or slightly convex surfaces, this K type probe is ideal for hot rollers and plates. (Requires 80TK Thermocouple Module | Requires 80AK Thermocouple Adapter for 170.) Exposed junction allows direct contact with the surface being measured Measurement range: 0 to 260?C (32 to 500°F)
  • Fluke 80PK-7

    Type-K thermocouple for surfaces in rugged environment. Durable ribbon sensor. Measurement range:-127 to 600°C
  • Fluke Ti400 Infrared Thermal Imager

    Resolution: 320 x 240 (76,800 pixels) Temperature Measurement Range:  -20 oC to +1200 oC LaserSharp® Auto Focus, exclusive to Fluke, uses a built-in laser distance meter that calculates and displays the distance from your designated target with pinpoint accuracy IR-PhotoNotes™ annotation system—captures digital images of the surrounding area to reference conditions or actual location and any Read more
  • Hart Scientific 9103

    The 9103S Controller automatically increases fan speed for cooling the block and decreases fan speed at your setpoint for maximum stability during calibrations. This gives you quick response without sacrificing measurement performance. Cooling and stabilization time within 18 minutes, and the 4 inches deep to minimize stem effect when calibrating long probes. Connect your thermal Read more
  • Hart Scientific 9141

    The 9141S controller automatically increases fan speed for cooling the block and decreases fan speed at your setpoimt for maximum stability during calibrations. This gives you quick response without sacrificing measurement performance. Heating and stabilization time within 12 minutes, and the 4 inches deep to minimize stem effect when calibrating long probes. Connect your thermal Read more
  • Net Safety TL-MP-KIT

    Net Safety Universal Flame Test Lamp is designed for use with our Ultraviolet, Ultraviolet/Infrared, and Triple Infrared flame detectors. Net Safety TL-MP-EX(-X) is a rechargeable, hand-held unit that is certified ClassI Division1 for hazardous areas. The TL-MP-EX(-X) tests the response of the detectors with a highly accurate fire simulation utilizing actual ultraviolet and infrared radiation Read more
  • Net Safety TL-UV/IR

    Two radiation sources necessary for alarm. Minimize false alarm eventsField of view of up to 120 degrees .Wider coverage per detector. Explosion-proof, Class I, Division 1 certified. Suitable hazardous locations. FM certified to Performance Standard 3260. Engineered to the highest standards. Connect indoors or out, directly or up to 2000 feet away .Flexible installation. Immune Read more
  • P.I.E. 512

    Features: – Simulate/Read RTD sensors. – Calibrate/Read directly in temperature for your RTD curve. – Adjustable output for full temperature range. – Several Manufacturers’ RTD Curves Available: Platinum, Copper & Nickel. – Accurate to ±0.25°C (±0.45°F) with 0.1° Resolution – Resistance accuracy of ±(0.015% + 0.05) ohms. – Auto Stepping: Selectable Step size and step Read more
  • P.I.E. 522

    The Practical Instrument Electronics (PIE) Model 522 is a complete source/read thermocouple calibrator providing direct temperature input to all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. The Model 522 is internally cold-junction compensated for accuracy in any operating environment. The PIE Model 522 offers the highest performance and Read more
  • P.I.E. 525

    Features: Direct Temperature Input/Output Eight Standard T/C Types available – J, K, E, T, R, S, B, N and mV RTD Curves available – Platinum, Copper, Nickel Guaranteed to Work with All Pulsed Instruments Works with a wide variety of transmitters including popular Rosemount and Honeywell Models Compatible with devices using pulsed excitation currents including Read more