Showing 1–16 of 18 results

  • Altek 1118-100psid

    Features: – Fast, Accurate Results – Selectable Engineering Units – Pressure Switch Testing Built-In – Full Scale Accuracy of 0.05%+ 1 Digit – Five Digit Resolution – 100 Hour Battery Life with Automatic Shut-off – Easy to Carry, Easy to Use
  • Crystal 33

    The Crystal 33 is a small pressure calibrator that can measure vacuum, “H2O, and pressures all the way up to 3000 psi. It can dipsplay applied pressure and milliamps or 2 pressures at the same time.
  • Crystal GaugeCal XP

    Features: Portability: With a small footprint of just 174.9mm x 428.8mm (7? x 17?), the GaugeCalXP can be mounted just about anywhere, and easily moved from one location to another. Ease of Operation: Pressure is precisely set with a simple turn of the handle, allowing you to calibrate gauges quickly and accurately. Performance: The GaugeCalXP Read more
  • Crystal NVision

    Features: – Pressure accuracy to 0.025% of reading – Field-replaceable modules: pressure, temperature,current and voltage – Temperature compensation from -20ºC to 50ºC – ATEX/IECEx intrinsically safe – Log and display 500,000 points at up to 10 readings/sec on up to two modules simultaneously – IP67 (1 meter immersion for 30 minutes) – Uses Crystal’s new Read more
  • Crystal nVision 10k psi Pressure Module

    Features: Measure, calibrate, and record up to 10,000 psi Field-replaceable modules Crystal Pressure Fittings (CPF) perform up to 15,000 psi and feature a safety weep hole to alert you before you accidentally disconnect from a pressurized system An industry-first patented o-ring connection allows CPF Fittings to maintain a leak-free seal up to 10,000 psi with Read more
  • Crystal nVision 1k psi Pressure Module

    Features: Measure, calibrate, and record up to 1,000 psi Field-replaceable modules Crystal Pressure Fittings (CPF) perform up to 15,000 psi and feature a safety weep hole to alert you before you accidentally disconnect from a pressurized system An industry-first patented o-ring connection allows CPF Fittings to maintain a leak-free seal up to 10,000 psi with Read more
  • Crystal nVision 30 psi Pressure Module

    Features: Measure, calibrate, and record up to 30 psi Field-replaceable modules Crystal Pressure Fittings (CPF) perform up to 15,000 psi and feature a safety weep hole to alert you before you accidentally disconnect from a pressurized system An industry-first patented o-ring connection allows CPF Fittings to maintain a leak-free seal up to 10,000 psi with Read more
  • Crystal nVision 3k psi Pressure Module

    Features: Measure, calibrate, and record up to 3,000 psi Field-replaceable modules Crystal Pressure Fittings (CPF) perform up to 15,000 psi and feature a safety weep hole to alert you before you accidentally disconnect from a pressurized system An industry-first patented o-ring connection allows CPF Fittings to maintain a leak-free seal up to 10,000 psi with Read more
  • Crystal XP2i Digital Pressure Gauge

    Lighter and easier to use than a deadweight tester, and more rugged than any mechanical pressure gauge. Features: 5 Full (7 segment) digits – great for leak testing 3 readings/second display rate Capture maximum or minimum pressure and can be set to average (dampen) unstable pressure readings Fully temperature compensated, so the accuracy is the Read more
  • Fluke 700P

    Display pressure readings in any of 10 different pressure units you specify in the calibrator setup. Rugged urethane molded case protects the module from rough handling and harsh conditions. Features internal temperature compensation from 0°C to 50°C for full-accuracy performance. Includes NIST-traceable calibration certificate .
  • Fluke 718-100G

    Features: 1) Built-in pressure / Vacuum hand pump, with vernier and bleed valves. 2) Pressure measurement to 0.05% of full span, using internal pressure sensor. 3) Pressure measurement to 10,000psi using any of the Fluke-700PXX  pressure modules. 4) Wide range of selectable units of pressure. 5) Current measurement with 0.025% accuracy and 0.001mA resolution. 6) Read more
  • Fluke 725

    The Fluke 725 is used to calibrate and test almost any process  parameter. The Fluke can measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Features: – Easy to read measure/source screen lets you view input and output simultaneously – Measure volts, mA, RTDs, thermocouples, frequency, and Read more
  • Magnum Pro M-10 Hydraulic Calibration Hand Pump

    Features: Contoured cushion handles Patented protective cage around vent knob Patented triple filtration (prevents pump failure caused by dirt) A non-oil based lubricant is used on all moving parts Built in pressure relief valve (prevents over pressurizing) Shatter proof reservoir Oversized check valves for smooth controlled operation Specifications: 0 – 10,000 psi (700 Bar) Compatible Read more
  • Magnum Pro MVP-600 Pneumatic Calibration Hand Pump

    Features: Contoured cushion handles Oversized check valve for smooth controlled operation Mash proof vent valve (No Needle Valve) A patented non-oil based lubricant is used on all moving parts Dual O-Rings on all pistons to ensure zero leakage Specifications: Vacuum 28″Hg to pressure 600psi (combination pump) Compatible with all gauges and calibrators Connections (2 ports) Read more
  • Meriam Instruments DP200 / 2000C

    This Meriam is a portable digital device designed for very precise pressure and differential pressure measurements. The Meriam is also able to measure voltage and currents. The Meriam is used for calibration on electronic transducers/transmitters as well as mechanical gauges and recorders.
  • Testo 435

    Features at a glance 1) Multi-Point averaging 2) Time averaging 3) Parallel temperature measurements 4) Velocity and temperture values at a glance