Fluke Archives - ITM Instruments Inc

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to filter out noise and capture starting current

Key Features: Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

Advanced power quality health – At-a-glance power quality health data in real time so you can make better maintenance decisions
Energy loss calculator – Discover the costs of energy loss specifically caused by poor power quality
Highest safety rating in industry – CAT III 1000 V / CAT IV 600

Key Features

High performance loop calibrator for calibration, repair, and maintenance
Features large display and simple, quick-click interface for easy one-handed operation.
Provides simultaneous mA and % readout for quick, easy interpretation of readings.
Delivers mA accuracy of 0.015%
Provides 1 µA resolution for mA source, simulate, and measure

Key Features

Calibration of both temperature and pressure transmitters
Measure/source/simulate mA loop parameters
Measure and source mA, Volts DC, frequency, and resistance
Built-in 24 V loop power supply
Store and recall frequently used calibration set ups

Product Highlights

ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use

Key Features

Complete pressure, temperature, and mA loop calibrator
Troubleshoot and calibrate HART smart digital transmitters
Create calibration procedures and automatically document results
Connect to calibration management software

Key Features:

Measures 4 to 20 mA signals without breaking the loop
Best in class 0.2% accuracy
Delivers 0.01 mA resolution and sensitivity
Measures mA signals for PLC and control system analog I/O
Detachable clamp for measurements in tight locations

Key Features:

Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.

The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.

Input: Probes with shrouded banana probe tip
Probe length: 1.5 meter (60 inch)
Maximum Input Voltage to Ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031
Maximum Differential Voltage: 1000V DC or1000Vrms or 1200V (DC + ACpeak)
Output Cable: Safety designed 0.5m (5ft) BNC Cable
Attenuation: 200x and 20x
Bandwidth: DC to 20 MHz (-3 dB)
Accuracy: ±2.5%
Rise time: 17.5 ns
CMRR: 200x: @ 60 Hz = 80dB, @ 1 MHz = 50 dB 20x: @ 60 Hz = 70dB, @ 1 MHz = 40 dB
Battery type: Alkaline 9 volt, NEDA, IEC6LR61
Battery life: 8-hour operation, 400-hour stand by
Power Adapter: PM 8907/80n (optional)
Included Accessories: AC85A Large Jaw Alligator Clips and AC83 Pin-Grabber Test Clips

Product Highlights: Accelerates every step of the copper certification process

Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Taptive™ user interface simplifies set-up, and eliminates errors
Analyze test results and create professional test reports using LinkWare™ management software
Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting
Intertek Verified to TIA Level 2G – the most stringent accuracy requirement
Copper cable certifiers endorsed by cabling vendors worldwide
Built in Alien Crosstalk testing
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management

The Fluke DTX-1800 Cable Analyzer Series significantly reduces total time to certify by improving every aspect of the testing process. The series combines powerful speed and unprecedented precision into one dynamite package. The DTX-1800 is a 900 MHz tester that can certify a Cat 6 link three times faster than other testers with 12-second Cat 6 Autotest and Level IV and proposed TIA Level IIIe Accuracy requirements. The DTX Series from Fluke Networks offers optional 900 MHz of testing bandwidth, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. It also includes optional on-board fiber modules for fiber-optic analysis and can be used to validate Power over Ethernet services. The DTX-1800 Fluke Cable Analytics and the DTX-1200 perform Cat 6 certification tests in just 9 seconds and in full compliance with industry standards and with superior accuracy over other products. Standard Accessories

DTX Compact OTDR Module
Fiber Loss/Length Test Module (multimode, singlemode, or gigabit multimode)
Fiber Compact OTDR Module option option DTX 10 Gig Kit
Network Service Module option option Patch Cord Test Adapters
Class F Adapters
Coax Cable Test Adapters option option Multimedia memory card
USB cable
Serial computer interface cable

Fiber optic cable test kit with SimpliFiber Pro and two single-mode light sources for verification of cabling in single-mode fiber networks
SimpliFiber Pro optical power meter with two single-mode light sources measures power and loss using dual-wavelength testing, which simultaneously transmits two wavelengths
Minimum and maximum function tracks power fluctuations, and a reference value can be set to enable a direct display of fiber loss
Up to 1,000 test results can be stored in the internal memory and downloaded to a PC
Kit includes an SC power meter adapter, a USB interface cable, LinkWare software, SimpliFiber Pro product manuals CD, a carrying case, and instructions

A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
Each clamp has two ranges: 200 A & 2000A, 1 or 10 mV/ Amp output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor Ø160 mm
CAT III 600V safety rating

Key Features:

Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM’s
Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm

Key Features:

Low level current clamp measures up to 5 A AC
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Take accurate readings without breaking the circuit
CAT III 600 V (For insulated conductors only)

The Fluke Ti401 PRO replaces the Ti200 and Ti300. The Fluke Ti401 PRO offers the ruggedness and ease of use that you’d expect from Fluke along with sharper, crisper images and more exacting temperature measurements. The popular pistol-grip design allows for one-handed use. Never lose sight of an issue with the 3.5-inch (landscape) LCD screen. Stream infrared data and operate the camera remotely with Fluke Connect Desktop software.

he DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting draft IEC Level V the most stringent accuracy requirement. The ProjX Management System helps ensure jobs are done correctly the first time and helps tracks progress from set-up to systems acceptance. Versiv platform supports modules for fiber testing (Both OLTS and OTDR) and Wi-Fi Analysis and Ethernet troubleshooting. The platform is easily upgradeable to support future standards. Troubleshoot faults faster with the Taptive user interface which graphically displays the source of failures including crosstalk, return loss and shield faults. Analyze test results and create professional test reports using LinkWare Live Management Software. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare Cable Test Management Software. Fluke Networks’ DSX-5000 CableAnalyzer is Intertek (ETL) Verified in accordance with the IEC-61935-1 specifications for accuracy Level IV, and draft accuracy Level V, and in accordance with the ANSI/TIA-1152 specifications for Level IIIe.

Key Features:

Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
Report creation using Fluke Connect desktop saves time and makes test results easier to understand
Fluke Connect saves test results to the cloud for analysis and preventive maintenance

Key Features:

Safety first. Connect the insulation tester then keep yourself out of harm’s way by monitoring your test measurements remotely.
Prove your job is done right by quickly seeing and sharing insulation resistance test results wirelessly with your smartphone.
Quickly find problems by saving and comparing measurements over time on a wireless device.

Key Features: The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:

3- and 4-Pole Fall-of-Potential (using stakes)
4-Pole Soil Resistivity testing (using stakes)
Selective testing (using 1 clamp and stakes)
Stakeless testing (using 2 clamps only) Adjustable limits – for quicker testing
IP56 rated for outdoor use
Rugged carrying case

Key Features:

Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
Logging measurement: Saves up to 32,760 measurements in memory

The Fluke 1736 Three-phase Power Quality Logger is a versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values, and capture dips, swells, and inrush currents with event waveform snapshots and high-resolution RMS profiles
Convenient instrument powering: Power instrument directly from the measured circuit
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting and use the integrated power quality health summary to get an at-a-glance understanding of system health
Comes included with 1500A CT’s

Key Features:

Three-phase power quality recorder with an Android tablet wireless front panel interface
Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Key Features: Equipped with new functionality

Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.

Key Features:

Measures AC/DC current with included iFlex current probe
VFD low pass filter for accurate measurements of non-linear signals
Remotely log, trend and monitor to pinpoint intermittent faults
Inrush measurement to f